Publikationen von Sandra Korte-Kerzel

Luo, W.; Gasper, C.; Zhang, S.; Sun, P. L.; Ulumuddin, N.; Petrova, A.; Lysogorskiy, Y.; Drautz, R.; Xie , Z.; Korte-Kerzel, S.: Non-basal plasticity in the μ-phase at room temperature. Acta Materialia 277, 120202 (2024)

Kanjilal, A.; Ahmadian, A.; Freund, M.; Sun, P.-L.; Korte-Kerzel, S.; Dehm, G.; Best, J. P.: Temperature-driven nanoscale brittle-to-ductile transition of the C15 CaAl₂ Laves phase. Materials & Design 244, 113206 (2024)

Zubair, M.; Sandlöbes-Haut, S.; Pei, R.; Wollenweber, M. A.; Berners, L.; Kusche, C.; Liu, C.; Roters, F.; Gibson, J. S. K. L.; Korte-Kerzel, S.: Strengthening of Mg–Al–Ca alloys with C15 and C36 Laves phases. Journal of Materials Research 38 (15), S. 3613 - 3627 (2023)

Luo, W.; Xie, Z.; Zhang, S.; Guénolé, J.; Sun, P.-L.; Meingast, A.; Alhassan, A.; Zhou, X.; Stein, F.; Pizzagalli, L. et al.; Berkels, B.; Scheu, C.; Korte-Kerzel, S.: Tailoring the Plasticity of Topologically Close-Packed Phases via the Crystals’ Fundamental Building Blocks. Advanced Materials 35 (24), 2300586 (2023)

Zubair, M.; Felten, M.; Hallstedt, B.; Vega-Paredes, M.; Abdellaoui, L.; Bueno Villoro, R.; Lipinska-Chwalek, M.; Ayeb, N.; Springer, H.; Mayer, J. et al.; Berkels, B.; Zander, D.; Korte-Kerzel, S.; Scheu, C.; Zhang, S.: Laves phases in Mg–Al–Ca alloys and their effect on mechanical properties. Materials & Design 225, 111470 (2023)

Andre, D.; Freund, M.; Rehman, U.; Delis, W.; Felten, M.; Nowak, J.; Tian, C.; Zubair, M.; Tanure, L.; Abdellaoui, L. et al.; Springer, H.; Best, J. P.; Zander, D.; Dehm, G.; Sandlöbes-Haut, S.; Korte-Kerzel, S.: Metallographic preparation methods for the Mg based system Mg–Al–Ca and its Laves phases. Materials Characterization 192, 112187 (2022)

Zhang, S.; Xie, Z.; Keuter, P.; Ahmad, S.; Abdellaoui, L.; Zhou, X.; Cautaerts, N.; Breitbach, B.; Aliramaji, S.; Korte-Kerzel, S. et al.; Hans, M.; Schneider, J. M.; Scheu, C.: Atomistic structures of〈0001〉tilt grain boundaries in a textured Mg thin film. Nanoscale 14 (48), S. 18192 - 18199 (2022)

Korte-Kerzel, S.; Hickel, T.; Huber, L.; Raabe, D.; Sandlöbes, S.; Todorova, M.; Neugebauer, J.: Defect phases–thermodynamics and impact on material properties. International Materials Reviews 66 (2021)

Kusche, C.; Dunlap, A.; Pütz, F.; Tian, C.; Kirchlechner, C.; Aretz, A.; Schwedt, A.; Al-Samman, T.; Münstermann, S.; Korte-Kerzel, S.: Efficient characterization tools for deformation-induced damage at different scales. Production Engineering 14, S. 95 - 104 (2020)

Li, J.; Lu, W.; Gibson, J. S.K.L.; Zhang, S.; Korte-Kerzel, S.; Raabe, D.: Compatible deformation and extra strengthening by heterogeneous nanolayer composites. Scripta Materialia 179, S. 30 - 35 (2020)

Guénolé, J.; Mouhib, F.-Z.; Huber, L.; Grabowski, B.; Korte-Kerzel, S.: Basal slip in laves phases: The synchroshear dislocation. Scripta Materialia 166, S. 134 - 138 (2019)

Sandlöbes, S.; Korte-Kerzel, S.; Raabe, D.: On the influence of the heat treatment on microstructure formation and mechanical properties of near-alpha Ti–Fe alloys. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 748, S. 301 - 312 (2019)

Chang, Y.; Lu, W.; Guénolé, J.; Stephenson, L.; Szczepaniak, A.; Kontis, P.; Ackerman, A.; Dear, F. F.; Mouton, I.; Zhong, X. et al.; Zhang, S.; Dye, D.; Liebscher, C.; Ponge, D.; Korte-Kerzel, S.; Raabe, D.; Gault, B.: Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials. Nature Communications 10, 942 (2019)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; Choi, P.-P.; Raabe, D.: On the nature of twin boundary-associated strengthening in Fe–Mn–C steel. Scripta Materialia 156, S. 27 - 31 (2018)

Li, J.; Lu, W.; Gibson, J. S.K.L.; Zhang, S.; Chen, T.; Korte-Kerzel, S.; Raabe, D.: Eliminating deformation incompatibility in composites by gradient nanolayer architectures. Scientific Reports 8 (1), 16216 (2018)

Chen, R.; Sandlöbes, S.; Zehnder, C.; Zeng, X.; Korte-Kerzel, S.; Raabe, D.: Deformation mechanisms, activated slip systems and critical resolved shear stresses in an Mg-LPSO alloy studied by micro-pillar compression. Materials and Design 154, S. 203 - 216 (2018)

Guillon, O.; Elsässer, C.; Gutfleisch, O.; Janek, J.; Korte-Kerzel, S.; Raabe, D.; Volkert, C.: Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials. Materials Today 21 (5), S. 527 - 536 (2018)

Sandlöbes, S.; Friák, M.; Korte-Kerzel, S.; Pei, Z.; Neugebauer, J.; Raabe, D.: A rare-earth free magnesium alloy with improved intrinsic ductility. Scientific Reports 7, 10458 (2017)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: Dislocation interaction and twinning-induced plasticity in face-centered cubic Fe–Mn–C micro-pillars. Acta Materialia 132, S. 162 - 173 (2017)

Chen, R.; Sandlöbes, S.; Zeng, X.; Li, D.; Korte-Kerzel, S.; Raabe, D.: Room temperature deformation of LPSO structures by non-basal slip. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 682, S. 354 - 358 (2017)