Publikationen von Yue Li

Li, Y.; Kwesi Nutor, R.; Gault, B.: L12-type chemical short-range ordering in compositionally complex alloys. Journal of Materials Science & Technology 250, S. 188 - 196 (2026)

Li, Y.; Wei, Y.; Saxena, A.; Kühbach, M.; Freysoldt, C.; Gault, B.: Machine learning enhanced atom probe tomography analysis. Progress in Materials Science 156, 101561 (2026)

Shi, H.; Zhang, X.; Liu, C.; Gong, X.; Li, Y.; Azmi, R.; Gong, Y.; Ponge, D.; Weisenburger, A.; Müller, G.: Exceptional high-temperature corrosion resistance of multi-component alloys via modulating Al and Nb. Corrosion Science 253, 112990, S. 112990 (2025)

Xu, Y.; Wu, Y.; Li, Y.; Zhang, M.; Skokov, K.; Gutfleisch, O.; Li, Y.; Zhao, S.; Yan, K.; Wang, X. et al.; Liu, J.; Wang, J.; Jiang, C.: Superhigh Magnetostriction in Non-Equilibrium Grown Fe-Ga Single-Crystals by Rapid-Directional-Solidification. Advanced Materials 37 (27), 2419037 (2025)

Yu, J.; Wang, Z.; Saksena, A.; Wei, S.; Wei, Y.; Colnaghi, T.; Marek, A.; Rampp, M.; Song, M.; Gault, B. et al.; Li, Y.: 3D deep learning for enhanced atom probe tomography analysis of nanoscale microstructures. Acta Materialia 278, 120280 (2024)

Li, Y.; Colnaghi, T.; Gong, Y.; Zhang, H.; Yu, Y.; Wei, Y.; Gan, B.; Song, M.; Marek, A.; Rampp, M. et al.; Zhang, S.; Pei, Z.; Wuttig, M.; Ghosh, S.; Körmann, F.; Neugebauer, J.; Wang, Z.; Gault, B.: Machine Learning-Enabled Tomographic Imaging of Chemical Short-Range Atomic Ordering. Advanced Materials 36 (44), 2407564 (2024)

Li, Y.; Gault, B.: Machine Learning Enhanced Tomographic Imaging of Chemical Short-range Order in Fe-based Solid Solutions. Microscopy and Microanalysis 30 (Supplement_1), S. 44 - 45 (2024)

Bauer, S.; Benner, P.; Bereau, T.; Blum, V.; Boley, M.; Carbogno, C.; Catlow, C. R. A.; Dehm, G.; Eibl, S.; Ernstorfer, R. et al.; Fekete, A.; Foppa, L.; Fratzl, P.; Freysoldt, C.; Gault, B.; Ghiringhelli, L. M.; Giri, S. K.; Gladyshev, A.; Goyal, P.; Hattrick-Simpers, J.; Kabalan, L.; Karpov, P.; Khorrami, M. S.; Koch, C.; Kokott, S.; Kosch, T.; Kowalec, I.; Kremer, K.; Leitherer, A.; Li, Y.; Liebscher, C.; Logsdail, A. J.; Lu, Z.; Luong, F.; Marek, A.; Merz, F.; Mianroodi, J. R.; Neugebauer, J.; Pei, Z.; Purcell, T.; Raabe, D.; Rampp, M.; Rossi, M.; Rost, J.-M.; Saal, J. E.; Saalmann, U.; Sasidhar, K. N.; Saxena, A.; Sbailo, L.; Scheidgen, M.; Schloz, M.; Schmidt, D. F.; Teshuva, S.; Trunschke, A.; Wei, Y.; Weikum, G.; Xian, R. P.; Yao, Y.; Yin, J.; Zhao, M.; Scheffler, M.: Roadmap on Data-Centric Materials Science. Modelling and Simulation in Materials Science and Engineering 32 (6), 063301 (2024)

Zhang, J.; Pang, X.; Li, Y.; Wei, S.; Yang, C.; Pan, S.; Sun, B.; Zhou, D.; Huang, X.; Zhang, D. et al.; Qin, G.: Tuning generalized planar fault energies to enable deformation twinning in nanocrystalline aluminum alloys. International Journal of Plasticity 178, 104018 (2024)

Zhang, X.; Yang, C.; Meng, L.; Chen, Z.; Gong, W.; Sun, B.; Zhao, S.; Zhang, D.; Li, Y.; Zhou, D.: The influence of precipitation on plastic deformation in a high Mg-containing AlMgZn-based crossover alloy: Slip localization and strain hardening. International Journal of Plasticity 173, 103896 (2024)

Geng, X.; Vega-Paredes, M.; Lu, X.; Chakraborty, P.; Li, Y.; Scheu, C.; Wang, Z.; Gault, B.: Concave Grain Boundaries Stabilized by Boron Segregation for Efficient and Durable Oxygen Reduction. Advanced Materials, 2404839 (2024)

Yan, K.; Xu, Y.; Niu, J.; Wu, Y.; Li, Y.; Gault, B.; Zhao, S.; Wang, X.; Li, Y.; Wang, J. et al.; Skokov, K. P.; Gutfleisch, O.; Wu, H.; Jiang, D.; He, Y.; Jiang, C.: Unraveling the origin of local chemical ordering in Fe-based solid-solutions. Acta Materialia 264, 119583 (2024)

Li, Y.; Wei, Y.; Wang, Z.; Liu, X.; Colnaghi, T.; Han, L.; Rao, Z.; Zhou, X.; Huber, L.; Dsouza, R. et al.; Gong, Y.; Neugebauer, J.; Marek, A.; Rampp, M.; Bauer, S.; Li, H.; Baker, I.; Stephenson, L.; Gault, B.: Quantitative three-dimensional imaging of chemical short-range order via machine learning enhanced atom probe tomography. Nature Communications 14 (1), 7410 (2023)

Peng, B.; Wei, Y.; Qin, Y.; Dai, J.; Li, Y.; Liu, A.; Tian, Y.; Han, L.; Zheng, Y.; Wen, P.: Machine learning-enabled constrained multi-objective design of architected materials. Nature Communications 14 (1), 6630 (2023)

Rao, Z.; Li, Y.; Zhang, H.; Colnaghi, T.; Marek, A.; Rampp, M.; Gault, B.: Direct recognition of crystal structures via three-dimensional convolutional neural networks with high accuracy and tolerance to random displacements and missing atoms. Scripta Materialia 234, 115542 (2023)

Liu, Y.; Li, H.; Zhang, Z.; Li, Y.; Jia, L.; Wang, J.; Wang, J.; Zhang, J.: Effect of Cu micro-alloying on the microstructure, mechanical and corrosion properties of Mg–Gd–Y–Zn based alloy applied as plugging tools. Journal of Alloys and Compounds 939, 168768 (2023)

Zhang, J.; Zhou, D.; Pang, X.; Zhang, B.; Li, Y.; Sun, B.; Valiev, R. Z.; Zhang, D.: Deformation-induced concurrent formation of 9R phase and twins in a nanograined aluminum alloy. Acta Materialia 244, 118540 (2023)

Zhou, D.; Zhang, X.; Wang, H.; Li, Y.; Sun, B.; Zhang, D.: Influence of Mg on tensile deformation behavior of high Mg-content Al–Mg alloys. International Journal of Plasticity 157, 103405 (2022)

Gault, B.; Klaes, B.; Morgado, F. F.; Freysoldt, C.; Li, Y.; De Geuser, F.; Stephenson, L.; Vurpillot, F.: Reflections on the Spatial Performance of Atom Probe Tomography in the Analysis of Atomic Neighborhoods. Microscopy and Microanalysis 28 (4), S. 1116 - 1126 (2022)

Li, Y.; Zhou, X.; Colnaghi, T.; Wei, Y.; Marek, A.; Li, H.; Bauer, S.; Rampp, M.; Stephenson, L.: Convolutional neural network-assisted recognition of nanoscale L1₂ ordered structures in face-centred cubic alloys. npj Computational Materials 7 (1), 8 (2021)