Publikationen von C. Sachs

Nikolov, S.; Fabritius, H. O.; Petrov, M.; Friák, M.; Lymperakis, L.; Sachs, C.; Raabe, D.; Neugebauer, J.: Robustness and optimal use of design principles of arthropod exoskeletons studied by ab initio-based multiscale simulations. Journal of the Mechanical Behavior of Biomedical Materials 4, S. 129 - 145 (2011)

Nikolov, S.; Petrov, M.; Lymperakis, L.; Friák, M.; Sachs, C.; Fabritius, H.; Raabe, D.; Neugebauer, J.: Revealing the Design Principles of High-Performance Biological Composites Using Ab initio and Multiscale Simulations: The Example of Lobster Cuticle. Advanced Materials 22 (4), S. 519 - 526 (2010)

Fabritius, H.; Sachs, C.; Romano, P.; Raabe, D.: Influence of structural principles on the mechanics of a biological fiber-based composite material with hierarchical organization: The exoskeleton of the lobster Homarus americanus. Advanced Materials 21, S. 391 - 400 (2009)

Sachs, C.; Fabritius, H.; Raabe, D.: Influence of the microstructure on deformation anisotropy of mineralized cuticle from the lobster Homarus americanus. Journal of Structural Biology 161, S. 120 - 132 (2008)

Sachs, C.; Fabritius, H.; Raabe, D.: Hardness and elastic properties of dehydrated cuticle from the lobster Homarus americanus obtained by nanoindentation. Journal of Material Research 21 (8), S. 1987 - 1995 (2006)

Raabe, D.; Romano, P.; Sachs, C.; Fabritius, H.; Al-Sawalmih, A.; Yi, S. B.; Servos, G.; Hartwig, H. G.: Microstructure and crystallographic texture of the chitin-protein network in the biological composite material of the exoskeleton of the lobster Homarus americanus. Materials Science and Engineering A 421, S. 143 - 153 (2006)

Sachs, C.; Fabritius, H.; Raabe, D.: Experimental investigation of the elastic-plastic deformation of mineralized lobster cuticle by digital image correlation. Journal of Structural Biology 155, S. 409 - 425 (2006)

Raabe, D.; Romano, P.; Al-Sawalmih, A.; Sachs, C.; Servos, G.; Hartwig, H. G.: Mesostructure of the Exoskeleton of the Lobster Homarus Americanus. Mater. Res. Soc. Sympos. Proc. 874, S. 155 - 160 (2005)

Raabe, D.; Romano, P.; Sachs, C.; Al-Sawalmih, A.; Brokmeier, H. G.; Yi, S. B.; Servos, G.; Hartwig, H. G.: Discovery of a honeycomb structure in the twisted plywood patterns of fibrous biological nano-composite tissue. Journal of Crystal Growth 283, 1-2, S. 1 - 7 (2005)

Raabe, D.; Sachs, C.; Romano, P.: The crustacean exoskeleton as an example of a structurally and mechanically graded biological nanocomposite material. Acta Materialia 53, S. 4281 - 4292 (2005)

Friák, M.; Fabritius, H.-O.; Nikolov, S.; Petrov, M.; Lymperakis, L.; Sachs, C.; Elstnerová, P.; Neugebauer, J.; Raabe, D.: Multi‐scale Modelling of a Biological Material: The Arthropod Exoskeleton. In: Materials Design Inspired by Nature: Function Through Inner Architecture (CHAPTER 9), S. 197 - 218 (Hg. Fratzl, P.; Dunlop, J.W.C.; Weinkamer, R.) (2013)

Fabritius, H.; Sachs, C.; Raabe, D.; Nikolov, S.; Friák, M.; Neugebauer, J.: Chitin in the exoskeletons of arthropoda: From ancient design to novel materials science. In: Chitin, S. 35 - 60 (Hg. editor), N. S. G. (.). Springer, Germany (2011)

Nikolov, S.; Sachs, C.; Fabritius, H.; Raabe, D.; Petrov, M.; Friak, M.; Neugebauer, J.; Lymperakis, L.; Ma, D.: Hierarchical modeling of the mechanical properties of lobster cuticle from nano‐ up to macroscale: The influence of the mineral content and the microstructure. In: Proceedings of MMM 2008 "Computational Modeling of biological and soft condensed matter systems", S. 667 - 670. 4th International Conference on Multiscale Materials Modeling, Tallahassee, FL, USA, 27. Oktober 2008 - 31. Oktober 2008. Dep. of Scientific Computing, Florida State University, USA (2008)

Raabe, D.; Al-Sawalmih, A.; Romano, P.; Sachs, C.; Brokmeier, H. G.; Yi, S. B.; Servos, G.; Hartwig, H. G.: Structure and crystallographic texture of arthropod bio-composites. In: Materials Science Forum, Proceedings of the 14th International Conference on Textures of Materials ICOTOM 14, S. 1665 - 1674. 14th International Conference on Textures of Materials ICOTOM 14, Leuven, Belgium, 11. Juli 2005 - 15. Juli 2005. Trans Tech Publications, Switzerland (2005)

Raabe, D.; Sachs, C.: Mesostructure of the Exoskeleton of the Lobster Homarus Americanus. Mater. Res. Soc. Sympos. Proc. 874, L.5.3, S. 161 - 166 (2005)

Friák, M.; Petrov, M.; Nikolov, S.; Sachs, C.; Fabritius, H. O.; Hemzalová, P.; Ma, D.; Lymperakis, L.; Raabe, D.; Hild, S. et al.; Ziegler, A.; Neugebauer, J.: Nano-to-macro-scale modeling of hierarchical biocoposites. SPP 1420 Summer School, UIm, Germany (2013)

Friák, M.; Petrov, M.; Nikolov, S.; Sachs, C.; Fabritius, H. O.; Hemzalová, P.; Ma, D.; Lymperakis, L.; Raabe, D.; Janus, A. M. et al.; Hild, S.; Zigler, A.; Neugebauer, J.: Arthropod cuticle: A biological multi-functional composite used as template for nano-to-macro-scale hierarchical modeling. Seventh International Conference on Materials Structure and Micromechanics of Fracture, Brno, Czech Republic (2013)

Friák, M.; Petrov, M.; Nikolov, S.; Sachs, C.; Fabritius, H. O.; Elstnerová, P.; Ma, D.; Lymperakis, L.; Raabe, D.; Hild, S. et al.; Zigler, A.; Neugebauer, J.: Arthropod cuticle: A biological multi-functional composite used as template for nano-to-macro-scale hierarchical modeling. Advanced Materials 2013, Zhenjiang, China (2013)

Friák, M.; Petrov, M.; Nikolov, S.; Sachs, C.; Fabritius, H.-O.; Elstnerová, P.; Ma, D.; Lymperakis, L.; Raabe, D.; Hild, S. et al.; Ziegler, A. S.; Neugebauer, J.: Arthropod cuticle: A biological multi-functional composite used as template for nano-to-macro-scale hierarchical modelling. EURO Bio-inspired Materials, International School and Conference on Biological Materials Science, Potsdam, Germany (2012)

Friák, M.; Petrov, M.; Nikolov, S.; Sachs, C.; Fabritius, H.-O.; Elstnerová, P.; Ma, D.; Lymperakis, L.; Raabe, D.; Hild, S. et al.; Ziegler, A. S.; Neugebauer, J.: Arthropod cuticle: A biological multi-functional composite used as template for nano-to-macro-scale hierarchical modelling. Euro BioMat, Jena, Germany (2011)