Publikationen von Dierk Raabe

Bajaj, P.; Kürnsteiner, P.; Gupta, A.; Wilms, M. B.; Hickel, T.; Weisheit, A.; Jägle, E. A.; Raabe, D.: Intrinsic Heat Treatment in Al–Sc Alloys During Laser Metal Deposition - Driving Factors, Kinetics and Effect of Impurities. Alloys for Additive Manufacturing Symposium 2019 (AAMS2019), Chalmers University of Technology, Gothenburg, Sweden (2019)

Hariharan, A.; Lu, L.; Risse, J.; Jägle, E. A.; Raabe, D.: Mechanisms Contributing to Solidification Cracking during laser powder bed fusion of Inconel-738LC. Alloys for Additive Manufacturing Symposium 2019 (AAMS2019), Chalmers University of Technology, Gothenburg, Sweden (2019)

Rao, Z.; Ponge, D.; Körmann, F.; Ikeda, Y.; Schneeweiss, O.; Friák, M.; Neugebauer, J.; Raabe, D.; Li, Z.: Invar effects in FeNiCo medium entropy alloys: from an invar treasure map to alloy design. DPG Regensburg 2019, Regensburg, Germany (2019)

Konijnenberg, P. J.; Stechmann, G.; Zaefferer, S.; Raabe, D.: Recent Developments in the Analysis of Microstructures by 3D-EBSD. Microscience Microscopy Congress 2019, Manchester, UK (2019)

Sedighiani, K.; Diehl, M.; Traka, K.; Roters, F.; Sietsma, J.; Raabe, D.: On the determination of constitutive parameters for a physics-based crystal plasticity model from macro-scale behavior. Meeting Materials 2018 , M2i Conference, Noordwijkerhout, The Netherlands (2018)

Sedighiani, K.; Traka, K.; Diehl, M.; Roters, F.; Sietsma, J.; Raabe, D.: Adaptive gridding/meshing for solving high-resolution large-deformation: application for 3D crystal plasticity simulations. M2i Conference and Meeting Materials 2018, Noordwijkerhout, The Netherlands (2018)

Bae, J. W.; Seol, J. B.; Li, Z.; Han, J. C.; Kim, J. G.; Raabe, D.; Kim, H. S.: Grain boundary segregation of boron in FeMnCrCoNi high-entropy alloy. 2nd International Conference on High-Entropy Materials (ICHEM 2018), Jesu, South Korea (2018)

Jun, H.; Choi, P.-P.; Li, Z.; Raabe, D.: Design of dual-phase refractory multi-principle element alloys. 2nd International Conference on High-Entropy Materials (ICHEM 2018), Jeju, South Korea (2018)

Diehl, M.; Kühbach, M.; Raabe, D.: Experimental–computational analysis of primary static recrystallizazion in DC04 steel. 9th International Conference on Multiscale Materials Modeling , Osaka, Japan (2018)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Bajaj, P.; Li, X.; Leinenbach, C.; Jägle, E. A.; Raabe, D.: Preventing the Coarsening of Al₃Sc Precipitates by the Formation of a Zr-rich Shell During Laser Metal Deposition. Alloys for Additive Manufacturing Symposium, Sheffield, UK (2018)

Luo, H.; Li, Z.; Ponge, D.; Raabe, D.: Corrosion behaviour of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution. Thermec 2018, Paris, France (2018)

Chang, Y.; Lu, W.; Stephenson, L.; Szczepaniak, A.; Kontis, P.; Ackerman, A.; Mouton, I.; Dye, D.; Liebscher, C.; Ponge, D. et al.; Raabe, D.; Gault, B.: Cryogenic Focused Ion Beam milling - a promising technique to prevent undesired hydrogen pick-up and hydride formation in Ti-alloys during specimen preparation. Atom Probe Tomography and Microscopy 2018 , Gaitherburg, MD, USA (2018)

Kühbach, M.; Breen, A. J.; Herbig, M.; Gault, B.; Raabe, D.: Building a Library of Simulated Atom Probe Data for Different Crystal Structures and Pillar Orientations Using TAPSim. APT&M 2018 International Conference on Atom-Probe Tomography & Microscopy, Washington, DC, USA (2018)

Schwarz, T.; Redinger, A.; Siebentritt, S.; Gault, B.; Raabe, D.; Choi, P.-P.: Increased detector efficiency helps to reveal new insights into compositional fluctuations at defects in Cu₂ZnSnSe₄ thin films. E-MRS Spring Meeting 2018, Strasbourg, France (2018)

Schweinar, K.; Beeg, S.; Kerger, P.; Corrêa da Silva, C.; Cao, J.; Amati, M.; Gregoratti, L.; Zeller, P.; Schlögl, R.; Raabe, D. et al.; Greiner, M. T.; Gault, B.: Correlative atom probe tomography and in-situ scanning photoemission electron microscopy applied to catalytically active materials. Atom Probe Tomography and Microscopy 2018, Gaitherburg, MD, USA (2018)

Springer, H.; Uhlenwinkel, V.; Baron, C.; Szczepaniak, A.; Jägle, E. A.; Raabe, D.: Innovative Metallurgical Design Strategies Tailored to Additive Manufacturing. MRS spring meeting, Phoenix, AZ, USA (2018)

Kwiatkowski da Silva, A.; Ponge, D.; Inden, G.; Gault, B.; Raabe, D.: Physical Metallurgy of Segregation and Austenite Reversion in Medium Mn Steels. TMS 2018 Annual Meeting & Exhibition, Phoenix, AZ, USA (2018)

Li, Z.; Körmann, F.; Grabowski, B.; Neugebauer, J.; Raabe, D.: Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity. TMS 2018, Phoenix, AZ, USA (2018)

Schwarz, T.; Redinger, A.; Siebentritt, S.; Gault, B.; Raabe, D.; Choi, P.-P.: Increased detector efficiency helps to reveal new insights into compositional fluctuations at defects in Cu₂ZnSnSe₄ thin films. APT&M 2018, NIST, Gaithersburg, MD, USA (2018)

Sedighiani, K.; Traka, K.; Raabe, D.; Sietsma, J.: Hot Deformation of low alloy steels. Meeting Materials 2017, M2i Conference, Noordwijkerhout, The Netherlands (2017)