Publikationen von Steffen Brinckmann

Tsybenko, H.; Tian, C.; Rau, J.; Breitbach, B.; Schreiber, P.; Greiner, C.; Dehm, G.; Brinckmann, S.: Deformation and phase transformation in polycrystalline cementite (Fe₃C) during single- and multi-pass sliding wear. Acta Materialia 227, 117694 (2022)

Tsybenko, H.; Farzam, F.; Dehm, G.; Brinckmann, S.: Scratch hardness at a small scale: Experimental methods and correlation to nanoindentation hardness. Tribology International 163, 107168 (2021)

Duarte, M. J.; Fang, X.; Rao, J.; Krieger, W.; Brinckmann, S.; Dehm, G.: In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach. Journal of Materials Science 56 (14), S. 8732 - 8744 (2021)

Tsybenko, H.; Xia, W.; Dehm, G.; Brinckmann, S.: On the commensuration of plastic plowing at the microscale. Tribology International 151, 106477 (2020)

Xia, W.; Dehm, G.; Brinckmann, S.: Investigation of single asperity wear at the microscale in an austenitic steel. WEAR 452–453, 203289 (2020)

Saxena, A. K.; Brinckmann, S.; Völker, B.; Dehm, G.; Kirchlechner, C.: Experimental conditions affecting the measured fracture toughness at the microscale: Notch geometry and crack extension measurement. Materials and Design 191, 108582 (2020)

Xia, W.; Dehm, G.; Brinckmann, S.: Insight into indentation-induced plastic flow in austenitic stainless steel. Journal of Materials Science 55, S. 9095 - 9108 (2020)

Ebner, A. S.; Brinckmann, S.; Plesiutschnig, E.; Clemens, H.; Pippan, R.; Maier-Kiener, V.: A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy. JOM-Journal of the Minerals Metals & Materials Society 72 (5), S. 2020 - 2029 (2020)

Xia, W.; Dehm, G.; Brinckmann, S.: Unraveling indentation-induced slip steps in austenitic stainless steel. Materials and Design 183, 108169 (2019)

Brinckmann, S.; Soler, R.; Dehm, G.: Towards quantifying the shear delamination of thin films. Materialia 8, 100421 (2019)

Kumar, A.; Saxena, A. K.; Kirchlechner, C.; Herbig, M.; Brinckmann, S.; Petrov, R.; Sietsma, J.: In-situ study on fracture behaviour of white etching layers formed on rails. Acta Materialia 180, S. 60 - 72 (2019)

Saxena, A. K.; Kumar, A.; Herbig, M.; Brinckmann, S.; Dehm, G.; Kirchlechner, C.: Micro fracture investigations of white etching layers. Materials and Design 180, 107892 (2019)

Fang, X.; Rasiński, M.; Kreter, A.; Kirchlechner, C.; Linsmeier, C.; Dehm, G.; Brinckmann, S.: Plastic deformation of tungsten due to deuterium plasma exposure: insights from micro-compression tests. Scripta Materialia 162, S. 132 - 135 (2019)

Brinckmann, S.: A framework for material calibration and deformation predictions applied to additive manufacturing of metals. International Journal of Fracture 218, S. 85 - 95 (2019)

Brinckmann, S.: The third Sandia fracture challenge: predictions of ductile fracture in additively manufactured metal. International Journal of Fracture 218 (1-2), S. 5 - 61 (2019)

Brinckmann, S.; Stratmann, A.; Dehm, G.; Jacobs, G.: Tribolayer formation during macro- and microscale cyclic contact. Tribology International 129, S. 436 - 441 (2019)

Fang, X.; Kreter, A.; Rasiński, M.; Kirchlechner, C.; Brinckmann, S.; Linsmeier, C.; Dehm, G.: Hydrogen embrittlement of tungsten induced by deuterium plasma: Insights from nanoindentation tests. Journal of Materials Research 33 (20), S. 3530 - 3536 (2018)

Luo, W.; Kirchlechner, C.; Fang, X.; Brinckmann, S.; Dehm, G.; Stein, F.: Influence of composition and crystal structure on the fracture toughness of NbCo₂ Laves phase studied by micro-cantilever bending tests. Materials and Design 145, S. 116 - 121 (2018)

Korbmacher, D.; von Pezold, J.; Brinckmann, S.; Neugebauer, J.; Hüter, C.; Spatschek, R. P.: Modeling of phase equilibria in Ni–H: Bridging the atomistic with the continuum scale. Metals 8 (4), 280 (2018)

Brinckmann, S.; Matoy, K.; Kirchlechner, C.; Dehm, G.: On the influence of microcantilever pre-crack geometries on the apparent fracture toughness of brittle materials. Acta Materialia 136, S. 281 - 287 (2017)