Publikationen von Eric Aime Jägle

Jägle, E. A.; Sheng, Z.; Kürnsteiner, P.; Ocylok, S.; Weisheit, A.; Raabe, D.: Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing. Materials 10 (1), 8 (2017)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Gault, B.; Jägle, E. A.; Raabe, D.: In-process Precipitation During Laser Additive Manufacturing Investigated by Atom Probe Tomography. Microscopy and Microanalysis 23 (S1), S. 694 - 695 (2017)

Springer, H.; Baron, C.; Szczepaniak, A.; Jägle, E. A.; Wilms, M. B.; Weisheit, A.; Raabe, D.: Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition. Materials and Design 111, S. 60 - 69 (2016)

Akhlaghi, M.; Meka, S. R.; Jägle, E. A.; Kurz, S.; Bischoff, E.; Mittemeijer, E. J.: Formation Mechanisms of Alloying Element Nitrides in Recrystallized and Deformed Ferritic Fe–Cr–Al Alloy. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 47 (9), S. 4578 - 4593 (2016)

Jägle, E. A.; Sheng, Z.; Wu, L.; Lu, L.; Risse, J.; Weisheit, A.; Raabe, D.: Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing. JOM-Journal of the Minerals Metals & Materials Society 68 (3), S. 943 - 949 (2016)

Fonović, M.; Leineweber, A.; Robach, O.; Jägle, E. A.; Mittemeijer, E. J.: The Nature and Origin of ‘‘Double Expanded Austenite’’ in Ni-Based Ni–Ti Alloys Developing Upon Low Temperature Gaseous Nitriding. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 46 (9), S. 4115 - 4131 (2015)

Ovri, H.; Jägle, E. A.; Stark, A.; Lilleodden, E. T.: Microstructural influences on strengthening in a naturally aged and overaged Al–Cu–Li–Mg based alloy. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 637, S. 162 - 169 (2015)

Guo, W.; Yao, J.; Jägle, E. A.; Choi, P.-P.; Herbig, M.; Schneider, J. M.; Raabe, D.: Deformation induced alloying in crystalline – metallic glass nano-composites. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 628, S. 269 - 280 (2015)

Jägle, E. A.; Choi, P.-P.; Raabe, D.: The maximum separation cluster analysis algorithm for atom-probe tomography: Parameter determination and accuracy. Microscopy and Microanalysis 20 (6), S. 1662 - 1671 (2014)

Guo, W.; Jägle, E. A.; Yao, J.; Maier, V.; Korte-Kerzel, S.; Schneider, J. M.; Raabe, D.: Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates. Acta Materialia 80, S. 94 - 106 (2014)

Jägle, E. A.; Choi, P.-P.; Van Humbeeck, J.; Raabe, D.: Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting. Journal of Materials Research 29 (17), S. 2072 - 2079 (2014)

Guo, W.; Jägle, E. A.; Choi, P.-P.; Yao, J.; Kostka, A.; Schneider, J. M.; Raabe, D.: Shear-induced mixing governs codeformation of crystalline-amorphous nanolaminates (Erratum: Physical Review Letters (2014) 113 (035501)). Physical Review Letters 113 (6), 069903 (2014)

Guo, W.; Jägle, E. A.; Choi, P.-P.; Yao, J.; Kostka, A.; Schneider, J. M.; Raabe, D.: Shear-induced mixing governs codeformation of crystalline-amorphous nanolaminates. Physical Review Letters 113 (3), 035501 (2014)

Kürnsteiner, P.; Hariharan, A.; Jung, H. Y.; Peter, N. J.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Gault, B.; Raabe, D.; Jägle, E. A.: Application of Atom Probe Tomography to Complex Microstructures of Laser Additively Manufactured Samples. Microscopy and Microanalysis 25, S2 Aufl., S. 2514 - 2515 (2019)

Lehmhus, D.; Busse, M.; von Hehl, A.; Jägle, E. A.: State of the Art and Emerging Trends in Additive Manufacturing: From Multi-Material processes to 3D printed Electronics. 5th International Conference of Engineering Against Failure (ICEAF-V 2018) , Chios Island, Greece, 20. Juni 2018 - 22. Juni 2018. MATEC Web of Conferences 188, 03013, (2018)

Jägle, E. A.; Sheng, Z.; Choi, P.-P.; Raabe, D.: Maraging steel produced by laser additive manufacturing: The influence of processing conditions on precipitation and austenite reversion behaviour. In: PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, S. 1029 - 1030 (Hg. Chen, L.-Q.; Militzer, M.; Botton, G.; Howe, J.; Sinclair, C. W. et al.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, PTM 2015, Whistler, BC, Canada, 28. Juni 2015 - 03. Juli 2015. PTM 2015, Whistler, British Columbia (2015)

Dehm, G.; Devulapalli, V.; Schulz, F.; Soares Barreto, E.; Ellendt, N.; Jägle, E. A.: Strengthening of CoCrFe(Mn)Ni high entropy alloys by dislocation pinning: From Lattice friction & SRO to particle strengthening. Possibilities and Limitations of Quantitative Materials Modeling and Characterization 2024, Bernkastel-kues, Germany (2024)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Bajaj, P.; Jägle, E. A.; Raabe, D.: Exploiting intrinsic heat treatment to trigger precipitation reactions in Maraging steels during Laser Additive Manufacturing. Metal Additive Manufacturing Conference, Örebro, Sweden (2019)

Kürnsteiner, P.; Hariharan, A.; Jung, H. Y.; Peter, N. J.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Gault, B.; Raabe, D.; Jägle, E. A.: Application of Atom Probe Tomography to Complex Microstructures of Laser Additively Manufactured Samples. Microscopy & Microanalysis Conference, Portland, OR, USA (2019)

Peter, N. J.; Jung, H. Y.; Gärtner , E.; Uhlenwinkel, V.; Dehm, G.; Jägle, E. A.: Nanoscale, continuous phase separation of Al-containing compositionally complex alloys via Laser Powder Bed Fusion. Frühjahrstagung der DPG , Regensburg, Germany (2019)