Publikationen von Jochen Michael Schneider

Kanjilal, A.; Aliramaji, S.; Neuß, D.; Hans, M.; Schneider, J. M.; Best, J. P.; Dehm, G.: Microscale deformation of an intermetallic-metal interface in bi-layered film under shear loading. Scripta Materialia 263, 116665 (2025)

Felten, M.; Lutz, A.; Aliramaji, S.; Zhang, S.; Scheu, C.; Schneider, J. M.; Zander, D.: The effect of Al on the corrosion resistance of binary Mg–Al solid solutions: Combining in-situ electrochemistry with combinatorial thin films. Electrochemistry Communications 164, 107749 (2024)

Woods, E.; Saksena, A.; El-Zoka, A.; Stephenson, L.; Schwarz, T.; Singh, M. P.; Aota, L. S.; Kim, S.-H.; Schneider, J.; Gault, B.: Nanoporous Gold Thin Films as Substrates to Analyze Liquids by Cryo-atom Probe Tomography. Microscopy and Microanalysis 30 (6), S. 1172 - 1180 (2024)

Neuß, D.; McCaroll, I.; Zhang, S.; Woods, E.; Delis, W. J.; Tanure, L.; Springer, H.; Sandlöbes, S.; Yang, J.; Todorova, M. et al.; Zander, D.; Scheu, C.; Schneider, J. M.; Hans, M.: High-resolution chemical and structural characterization of the native oxide scale on a Mg-based alloy. Corrosion Science 227, 111776 (2024)

Harandi, A.; Rezaei, S.; Aghda, S. K.; Du, C.; Brepols, T.; Dehm, G.; Schneider, J. M.; Reese, S.: Numerical and experimental studies on crack nucleation and propagation in thin films. International Journal of Mechanical Sciences 258, 108568 (2023)

Patterer, L.; Mayer, E.; Mráz, S.; Pöllmann, P. J.; Hans, M.; Primetzhofer, D.; Souza Filho, I. R.; Springer, H.; Schneider, J.: Effect of Si on the hydrogen-based direct reduction of Fe₂O₃ studied by XPS of sputter-deposited thin-film model systems. Scripta Materialia 233, 115515 (2023)

Ferraz Morgado, F.; Stephenson, L.; Rousseau, L.; Vurpillot, F.; Evertz, S.; Schneider, J.; Gault, B.: Improving Spatial and Elemental Associations in Analytical Field Ion Microscopy. Microscopy and Microanalysis 29 (3), S. 1077 - 1086 (2023)

Gopalan, H.; Marshal, A.; Hans, M.; Primetzhofer, D.; Cautaerts, N.; Breitbach, B.; Völker, B.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.: On the interplay between microstructure, residual stress and fracture toughness of (Hf–Nb–Ta–Zr)C multi-metal carbide hard coatings. Materials and Design 224, 111323 (2022)

Devulapalli, V.; Hans, M.; Prithiv, T. S.; Schneider, J. M.; Dehm, G.; Liebscher, C.: Microstructure, grain boundary evolution and anisotropic Fe segregation in (0001) textured Ti thin films. Acta Materialia 238, 118180 (2022)

Bishara, H.; Kontis, P.; Dehm, G.; Schneider, J. M.; Evertz, S.: Effect of hybridization in PdAlY-(Ni/Au/Ir) metallic glasses thin films on electrical resistivity. Scripta Materialia 214, 114681 (2022)

Mishra, A. K.; Gopalan, H.; Hans, M.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.; Jaya, B. N.: Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN. Acta Materialia 228, 117777 (2022)

Göhl, D.; Rueß, H.; Mingers, A. M.; Mayrhofer, K. J. J.; Schneider, J. M.; Ledendecker, M.: Electrochemical Passivation Properties of Valve Transition Metal Carbides. Journal of the Electrochemical Society 169 (1), 011502 (2022)

Bogdanovski, D.; Poellmann, P. J.; Schneider, J. M.: An ab initio investigation of the temperature-dependent energetic barriers towards CrAlB and (Mo,Cr)AlB formation in a metastable synthesis scenario. Nanoscale 14, S. 12866 - 12874 (2022)

Sahu, R.; Bogdanovski, D.; Achenbach, J.-O.; Schneider, J. M.; Scheu, C.: Defects in an orthorhombic MoAlB MAB phase thin film grown at moderate synthesis temperature. Nanoscale 14 (7), S. 2578 - 2585 (2022)

Zhang, S.; Xie, Z.; Keuter, P.; Ahmad, S.; Abdellaoui, L.; Zhou, X.; Cautaerts, N.; Breitbach, B.; Aliramaji, S.; Korte-Kerzel, S. et al.; Hans, M.; Schneider, J. M.; Scheu, C.: Atomistic structures of〈0001〉tilt grain boundaries in a textured Mg thin film. Nanoscale 14 (48), S. 18192 - 18199 (2022)

Holzapfel, D. M.; Mušić, D.; Hans, M.; Wolff-Goodrich, S.; Holec, D.; Bogdanovski, D.; Arndt, M.; Eriksson, A. O.; Yalamanchili, K.; Primetzhofer, D. et al.; Liebscher, C.; Schneider, J. M.: Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation. Acta Materialia 218, 117204 (2021)

Hans, M.; Keuter, P.; Saksena, A.; Sälker, J. A.; Momma, M.; Springer, H.; Nowak, J.; Zander, D.; Primetzhofer, D.; Schneider, J. M.: Opportunities of combinatorial thin film materials design for the sustainable development of magnesium-based alloys. Scientific Reports 11, 17454 (2021)

Völker, B.; Stelzer, B.; Mráz, S.; Rueß, H.; Sahu, R.; Kirchlechner, C.; Dehm, G.; Schneider, J. M.: On the fracture behavior of Cr₂AlC coatings. Materials and Design 206, 109757 (2021)

Marshal, A.; Singh, P.; Mušić, D.; Wolff-Goodrich, S.; Evertz, S.; Schökel, A.; Johnson, D. D.; Dehm, G.; Liebscher, C.; Schneider, J. M.: Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films. Journal of Alloys and Compounds 854, 155178 (2021)

Wolff-Goodrich, S.; Marshal, A.; Pradeep, K. G.; Dehm, G.; Schneider, J. M.; Liebscher, C.: Combinatorial exploration of B2/L2₁ precipitation strengthened AlCrFeNiTi compositionally complex alloys. Journal of Alloys and Compounds 853, 156111 (2021)