Publikationen von Gerhard Dehm

Dehm, G.; Devulapalli, V.; Schulz, F.; Soares Barreto, E.; Ellendt, N.; Jägle, E. A.: Strengthening of CoCrFe(Mn)Ni high entropy alloys by dislocation pinning: From Lattice friction & SRO to particle strengthening. Possibilities and Limitations of Quantitative Materials Modeling and Characterization 2024, Bernkastel-kues, Germany (2024)

Holz, H.; Bhaskar, L.; Bellón Lara, B.; Sonawane, D.; Dehm, G.; Best, J. P.; Ramachandramoorthy, R.: Influence of a low angle grain boundary on high strain rate deformation in Copper. MecaNano, Vienna, Austria (2024)

Vacirca, D.; Bignoli, F.; Li Bassi, A.; Best, J. P.; Dehm, G.; Faurie, D.; Djemia, P.; Ghidelli, M.: Boosting mechanical properties of thin film high entropy alloys through nanoengineering design strategies. 16th International Conference on Local Mechanical Properties, Prague, Czech Republic (2024)

Bhaskar, L.; Bellón Lara, B.; Sonawane, D.; Holz, H.; Frey, D.; Petho, L.; Michler, J.; Mohanty, G.; Dehm, G.; Ramachandramoorthy, R.: Exploring micro-/nano- mechanical behaviour at extreme strain rates. TMS Annual Meeting and Exhibition 2024, Orlando, FL, USA (2024)

Bhat, M. K.; Brink, T.; Ding, H.; Jung, C.; Best, J. P.; Dehm, G.: Influence of the Structure and Chemistry of Σ5 Grain Boundaries on Microscale Strengthening in Cu Bicrystals. TMS Annual Meeting and Exhibition 2024, Orlando, FL, USA (2024)

Brink, T.; Langenohl, L.; Ahmad, S.; Liebscher, C.; Dehm, G.: Universality of grain boundary phases in [111] tilt boundaries of fcc metals. TMS 2024 Annual Meeting & Exhibition, Orlando, FL, USA (2024)

Kanjilal, A.; Best, J. P.; Dehm, G.: Elevated temperature deformation of intermetallic phases in Mg–Al–Ca alloy at small length scale. International conference on creep and fracture of engineering materials and structures, Creep 2024, Bangalore, India (2024)

Kini, M. K.; Nandy, S.; Best, J. P.; Dehm, G.: Deformation of CoCrFeNi alloy thin films under thermal fatigue. International Conference on Creep and Fracture of Engineering Materials and Structures CREEP 2024, Bangalore, India (2024)

Kanjilal, A.; Best, J. P.; Dehm, G.: Using in-situ nano- and micromechanical testing to probe the fracture behavior of intermetallic Laves phase materials. 7th International Indentation Workshop – IIW7, Hyderabad, India (2023)

Sonawane, D.; Bhaskar, L.; Holz, H.; Stein, F.; Dehm, G.; Ramachandramoorthy, R.: Nanoindentation of FeAl in the Ultra-High Strain Rate Regime. 7th International Indentation Workshop – IIW7, Hyderabad, India (2023)

Zhou, X.; Ahmadian, A.; Hickel, T.; Gault, B.; Ophus, C.; Liebscher, C.; Dehm, G.; Raabe, D.: Atomic Scale Analysis Reveals the Interplay between Grain Boundary Structure and Composition. MRS 2023, Boston, MA, USA (2023)

Nicolin, N.; Best, J. P.; Evertz, S.; Dehm, G.; Getzlaff, M.: Synthesis and characterisation of reactive magnetron sputtered wüstite thin films. European Materials Day 2023, online (2023)

Dehm, G.: Resolving the interplay of structure and energy landscapes of tilt grain boundaries in metals. 3rd ELSICS Conference and Bunsen-Colloquium “Energy Landscapes and Structure in Ion Conducting Solids (ELSICS)”, Ulm, Germany (2023)

Zhou, X.; Bai, Y.; Kim, S.-H.; Ma, Y.; Liebscher, C.; Gault, B.; Rezaei Mianroodi, J.; Dehm, G.; Raabe, D.: The chemical, thermodynamic and kinetic roles of pores in the hydrogen-based direct reduction of single-crystalline wüstite into iron. EUROMAT 2023, Frankfurt, Germany (2023)

Bhaskar, L.; Bellón Lara, B.; Sonawane, D.; Holz, H.; Frey, D.; Mohanty, G.; Dehm, G.; Ramachandramoorthy, R.: Ultra-high strain rate nanoindentation and micro compression. FEMS Euromat, Frankfurt, Germany (2023)

Dehm, G.; Liebscher, C.: In situ TEM study of deformation and phase transformation mechanisms in chemically complex alloys. Symposium In-situ & Environmental Microscopy, 20th International Microscopy Congress, Busan, Korea (2023)

Kanjilal, A.; Rehman, U.; Best, J. P.; Dehm, G.: Role of temperature on micromechanical fracture behaviour of Laves phase in Mg–Al–Ca ternary alloy. FEMS EUROMAT 2023, Frankfurt, Germany (2023)

Kanjilal, A.; Rehman, U.; Best, J. P.; Dehm, G.: Role of temperature on micromechanical fracture behavior of Laves phase in Mg–Al–Ca ternary alloy. FEMS Euromat 2023, Frankfurt am Main, Germany (2023)

Sahu, S.; Dehm, G.; Best, J. P.: Deformation mechanism analysis of single crystal hematite Fe₂O₃ using nanoindentation. FEMS EUROMAT 2023, Frankfurt, Germany (2023)

Sonawane, D.; Bhaskar, L.; Bellón Lara, B.; Chatain, D.; Palm, M.; Best, J. P.; Dehm, G.; Ramachandramoorthy, R.: Dynamic Testing of Iron-Aluminium Alloy Microparticles Fabricated using a Solid-State Dewetting. FEMS EUROMAT 2023, Frankfurt, Germany (2023)