Publikationen von Dirk Ponge

Chang, Y.; Breen, A. J.; Tarzimoghadam, Z.; Kürnsteiner, P.; Gardner, H.; Ackerman, A.; Radecka, A.; Bagot, P. A. J.; Lu, W.; Li, T. et al.; Jägle, E. A.; Herbig, M.; Stephenson, L.; Moody, M. P.; Rugg, D.; Dye, D.; Ponge, D.; Raabe, D.; Gault, B.: Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale. Acta Materialia 150, S. 273 - 280 (2018)

Luo, H.; Li, Z.; Lu, W.; Ponge, D.; Raabe, D.: Hydrogen embrittlement of an interstitial equimolar high-entropy alloy. Corrosion Science 136, S. 403 - 408 (2018)

Kwiatkowski da Silva, A.; Inden, G.; Kumar, A.; Ponge, D.; Gault, B.; Raabe, D.: Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography. Acta Materialia 147, S. 165 - 175 (2018)

Dutta, A.; Ponge, D.; Sandlöbes, S.; Raabe, D.: Understanding hot vs. Cold rolled medium manganese steel deformation behavior using in situ microscopic digital image correlation. Materials Science Forum 941, S. 198 - 205 (2018)

Gault, B.; Breen, A. J.; Chang, Y.; He, J.; Jägle, E. A.; Kontis, P.; Kürnsteiner, P.; Kwiatkowski da Silva, A.; Makineni, S. K.; Mouton, I. et al.; Peng, Z.; Ponge, D.; Schwarz, T.; Stephenson, L.; Szczepaniak, A.; Zhao, H.; Raabe, D.: Interfaces and defect composition at the near-atomic scale through atom probe tomography investigations. Journal of Materials Research 33 (23), S. 4018 - 4030 (2018)

Yao, M.; Welsch, E. D.; Ponge, D.; Haghighat, S. M. H.; Sandlöbes, S.; Choi, P.-P.; Herbig, M.; Bleskov, I.; Hickel, T.; Lipinska-Chwalek, M. et al.; Shanthraj, P.; Scheu, C.; Zaefferer, S.; Gault, B.; Raabe, D.: Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel. Acta Materialia 140, S. 258 - 273 (2017)

Ponge, D.; Diehl, M.; Archie, F. M. F.; Zaefferer, S.; Roters, F.; Raabe, D.: Development of damage-resistant dual-phase steels. Chernye Metally 57 (9), S. 40 - 41 (2017)

Luo, H.; Li, Z.; Chen, Y.-H.; Ponge, D.; Rohwerder, M.; Raabe, D.: Hydrogen effects on microstructural evolution and passive film characteristics of a duplex stainless steel. Electrochemistry Communucations 79, S. 28 - 32 (2017)

Jiang, S.; Wang, H.; Wu, Y.; Liu, X.; Chen, H.; Yao, M.; Gault, B.; Ponge, D.; Raabe, D.; Hirata, A. et al.; Chen, M.; Wang, Y.; Lu, Z.: Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation. Nature 544 (7651), S. 460 - 464 (2017)

Tarzimoghadam, Z.; Ponge, D.; Klöwer, J.; Raabe, D.: Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation. Acta Materialia 128, S. 365 - 374 (2017)

Koyama, M.; Zhang, Z.; Wang, M.; Ponge, D.; Raabe, D.; Tsuzaki, K.; Noguchi, H.; Tasan, C. C.: Bone-like crack resistance in hierarchical metastable nanolaminate steels. Science 355 (6329), S. 1055 - 1057 (2017)

Kwiatkowski da Silva, A.; Leyson, G.; Kuzmina, M.; Ponge, D.; Herbig, M.; Sandlöbes, S.; Gault, B.; Neugebauer, J.; Raabe, D.: Confined chemical and structural states at dislocations in Fe–9wt%Mn steels: A correlative TEM-atom probe study combined with multiscale modelling. Acta Materialia 124, S. 305 - 315 (2017)

Han, J.; Kang, S.-H.; Lee, S.-J.; Kawasaki, M.; Lee, H.-J.; Ponge, D.; Raabe, D.; Lee, Y.-K.: Superplasticity in a lean Fe–Mn–Al steel. Nature Communications 8, 751, S. 1 - 6 (2017)

Han, J.; Kwiatkowski da Silva, A.; Ponge, D.; Raabe, D.; Lee, S.-M.; Lee, Y.-K.; Lee, S.-I.; Hwang, B.: The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel. Acta Materialia 122, S. 199 - 206 (2017)

Ponge, D.; Diehl, M.; Archie, F. M. F.; Zaefferer, S.; Roters, F.; Raabe, D.: Entwicklung schadenstoleranter Dualphasenstähle. Stahl und Eisen 137, S. 88 - 88 (2017)

Welsch, E. D.; Ponge, D.; Haghighat, S. M. H.; Sandlöbes, S.; Choi, P.-P.; Herbig, M.; Zaefferer, S.; Raabe, D.: Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel. Acta Materialia 116, S. 188 - 199 (2016)

Wang, M.; Tasan, C. C.; Ponge, D.; Raabe, D.: Spectral TRIP enables ductile 1.1 GPa martensite. Acta Materialia 111, S. 262 - 272 (2016)

Tarzimoghadam, Z.; Rohwerder, M.; Merzlikin, S. V.; Bashir, A.; Yedra , L.; Eswara, S.; Ponge, D.; Raabe, D.: Multi-scale and spatially resolved hydrogen mapping in a Ni–Nb model alloy reveals the role of the δ phase in hydrogen embrittlement of alloy 718. Acta Materialia 109, S. 69 - 81 (2016)

Tan, X.-D.; Xu, Y.-B.; Ponge, D.; Yang, X.-L.; Hu, Z.-P.; Peng, F.; Ju, X.-W.; Wu, D.; Raabe, D.: Effect of intercritical deformation on microstructure and mechanical properties of a low-silicon aluminum-added hot-rolled directly quenched and partitioned steel. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 656, S. 200 - 215 (2016)

Li, Y.; Ponge, D.; Choi, P.-P.; Raabe, D.: Atomic scale investigation of non-equilibrium segregation of boron in a quenched Mo-free martensitic steel. Ultramicroscopy 159, S. 240 - 247 (2015)