Suchergebnisse

Prymak, O.; Stein, F.; Frommeyer, G.; Raabe, D.: Phase equilibria in the Nb–Cr–Al system at 1150, 1300 and 1450 °C. Workshop "The Nature of Laves Phases IX", Stuttgart, Germany (2007)

Roters, F.: Strain Gradient Plasticity with Internal Interfaces. Workshop on Small Scale Plasticity, Braunwald, Switzerland (2007)

Stein, F.; Siggelkow, L.; Kreiner, G.; Palm, M.: Unusual mechanical behaviour of the intermetallic phase Nb₂Co₇. Workshop "The Nature of Laves Phases IX", Stuttgart, Germany (2007)

Sturm, D.; Saage, H.; Heilmaier, M.; Paninski, M.; Schmitz, G. J.; Palm, M.; Stein, F.; Drevermann, A.; Engberding, N.: Mechanical properties of centrifugally cast Al-rich TiAl alloys. EUROMAT 2007, Nürnberg, Germany (2007)

Uijttewaal, M.; Hickel, T.; Neugebauer, J.: Ab initio investigation of temperature dependent effects in Ni_{2}MnGa: The pre-martensitic transition. Convention of the SPP 1239, Castle Eichholz in Wesseling, Germany (2007)

Wang, X.; Grundmeier, G.: Combined spectroscopic, microscopic and electrochemical analysis of release properties of Ag-nanoparticles embedded in fluorocarbon plasma polymer films. The 58th Annual Meeting of the International Society of Electrochemistry, Banff, Canada (2007)

Zeller, S.; Gnauk, J.; Frommeyer, G.: Direct casting and rapid solidification of CuAl SMS wires and characterisation of the microstructure. E-MRS 2007 Fall Meeting, Warsaw, Poland (2007)

Zuo, J.; Keil, P.; Grundmeier, G.: Structural Characterization of Silver Containing Titania Nanocomposite Films Synthesized by RF-Magneton Sputter Deposition. EUROMAT 2007, European Congress and Exhibition an Advanced Materials and Processes, Nürnberg, Germany (2007)

Raabe, D.: Crystal mechanics of metals and biomaterials at small and at large scales. Seminat Talk at Ecole Centrale, Paris, France (2007)

Balasundaram, K.; Grundmeier, G.; Raabe, D.: Nanomechanics of thin glassy polystyrene films. 1st IMPRS-SurMat Workshop on Surface and Interface Engineering in Advanced Materials, Klosterhost, Germany (2007)

Zaefferer, S.: Some ideas on the formation mechanisms and intensity distribution of backscatter Kikuchi patterns. M&M 2007, Microscopy and Microanalysis 2007 Meeting, Ft. Lauderdale, USA (2007)

Zaefferer, S.; Wright, S. I.; Raabe, D.: 3D-orientation microscopy in a FIB SEM: A new dimension of microstructure characterisation. M&M 2007, Microscopy and Microanalysis 2007 Meeting, Ft. Lauderdale, FL, USA (2007)

Hickel, T.: Research at the department of Computational Materials Design. Visit of the Steering Committee of IISI project “India 2020”, MPIE Duesseldorf, Germany (2007)

Blum, W.; Eisenlohr, P.; Amberger, D.; Milička, K.; Göken, M.: Microstructure - Plasticity relationship of Mg-alloys at elevated temperatures. 100th Eastern Forum of Science and Technology "Adv. Magnesium Alloys and Their Applications", Shanghai, China (2007)

Friák, M.; Sander, B.; Ma, D.; Raabe, D.; Neugebauer, J.: Theory-guided design of Ti-binaries for human implants. XVI. International Materials Research Congress, Cancun (Merrida), Mexico (2007)

Palm, M.: Strengthening mechanisms for Fe–Al-based alloys with increased creep resistance at high temperatures. Seminar, Charles University, Prague, Czech Republic (2007)

Varnik, F.: Wettability gradient-induced flows: Surface characterization, lab-on-chip experiments and computer simulations. Annual Meeting of the DFG-Priority Program Nano- & Microfluidics (SPP 1164), Bad-Honnef, Germany (2007)

Pyzalla, A. R.; Isaac, A.; Sket, F.; Dzieciol, K.; Sauthoff, G.: Investigation of creep damage evolution in alloys and composites using synchrotron radiation. 2007 Denver X-ray Conference, Colorado, USA (2007)

Zeller, S.; Gnauk, J.; Frommeyer, G.: Parameter studies on in-rotating-liquid spinning for rapidly solidified thin wires. 5th Decannial International Conference on Solidification Processing, Sheffield, UK (2007)

Raabe, D.; Zaafarani, N.; Roters, F.; Zaefferer, S.: 3D studies on orientation patterning below nanoindents in Cu single crystals using 3D EBSD and crystal plasticity finite element simulations. 3rd Intern. Indentation Workshop, Cavendish Lab., Cambridge, UK (2007)