Suchergebnisse

Rasp, W.; Yusupov, A.: Modelling of Spread and Side-Form Function in Hot Rolling by Different Upper-Bound Approaches. IIIrd European Conference on Computational Mechanics (III rd ECCM), Lisbon, Portugal (2006)

Rohwerder, M.: Intelligenter Korrosionsschutz mittels Nanocomposite Coatings auf Basis leitfähiger Polymere. Polymers & Coatings 2006, Universität Mainz, Mainz, Germany (2006)

Spiegel, M.; Stein, F.; Pöter, B.: Initial Stages of Oxide Growth on Fe–Al Alloys. 3rd Disc.Meeting on the Development of Innovative Iron Aluminium Alloys, Mettmann-Düsseldorf, Germany (2006)

Stein, F.; Palm, M.: DTA Studies on the Fe–Al Phase Diagram. 3rd Disc.Meeting on the Development of Innovative Iron Aluminium Alloys, Mettmann-Düsseldorf, Germany (2006)

Zaafarani, N.: 3D EBSD characterization and crystal plasticity FE simulation of the texture and microstructure below a nanoindent in Cu. International Symposium on Plasticity, Halifax, Canada (2006)

Zaafarani, N.: A Study of Deformation and Texture Evolution during Nanoindentation in a Cu Single Crystal Using Phenomological and Physically-Based Crystal Plasticity FE Models. Fundamentals of Deformation and Annealing Symposium, Manchester, UK (2006)

Hassel, A. W.: Ordered Arrays of single crystalline refractory metal nanowires. International Center for Young Scientist – Seminar, Tsukuba, Japan (2005)

Raabe, D.: Neues aus der Eisenzeit - Simulationen und Experimente in der Kristallmechanik und frischer Hummer. Lise-Meitner-Kolloquium, Hahn-Meitner-Institut (HMI), Berlin, Germany (2005)

Raabe, D.: Integrative Werkstoffmodellierung. Finalizing Conference of Sonderforschungsbereich SFB 370, together with an international Konferenz “Integral Materials Modeling”, Aachen, Germany (2005)

Grundmeier, G.: Advanced Interface Analysis and Interfacial Engineering of Coil Coated Materials. International Symposium on Coil Coating, Paris, France (2005)

Sachs, C.; Fabritius, H.; Romano, P.; Raabe, D.: Viscoelastic Behavior of Lobster Cuticle as a Function of Mineralization Grade. MRS Fall Meeting, Boston, MA, USA (2005)

Lymperakis, L.; Neugebauer, J.: Electronic properties of non-stoichiometric dislocation cores in GaN. Materials Research Society fall meeting, Boston, MA, USA (2005)

Spiegel, M.: Chlorkorrosion an Metallen. Seminar Werkstoffzentrum Rheinbach, Rheinbach, Germany (2005)

Zaefferer, S.: The Goss texture formation in silicon steels: Oriented nucleation or growth selection? Materials Science Seminar PAN, Krakow, Poland (2005)

Zaefferer, S.: Application of orientation microscopy in SEM and TEM for the study of texture formation during recrystallisation processes. Materials Science Seminar, Institute for Materials Science, Krakow, Poland (2005)

Frommeyer, G.; Gnauk, J.; Frech, W.: Wire casting and in-rotating-liquid-spinning processes for the continuous production of wires and high strength and soft magnetic fibres. 12th ISIJ-VDEh Seminar, Kitakyushu, Japan (2005)

Frommeyer, G.; Gnauk, J.; Frech, W.: Wire casting and in-rotating-liquid-spinning processes for the continuous production of wires and high strength and soft magnetic fibres. ISIJ-VDEh Deutsch-Japanisches Seminar, Fukuoka, Japan (2005)

Zaefferer, S.: Möglichkeiten und Grenzen der Orientierungsmikroskopie mittels EBSD im Rasterelektronenmikroskop. Werkstoffausschuss & Unterausschuss für Metallographie, Werkstoffanalytik und -simulation des VdeH, Düsseldorf (2005)

Yi, S. B.: Texture analysis using neutrons and X-rays. PNAM (Photon and Neutron research on Advanced engineering Materials) Autumn School, Hamburg (2005)

Sachs, C.: Natur und Technik – Forschungsprojekte des MPIE. Stahltag 2005, Duesseldorf, (Germany) (2005)