Suchergebnisse

Godec, M.; Zaefferer, S.; Kraner, J.; Donik, Č.; Paulin, I.: Influence of symmetric and asymmetric rolling on texture evolution of work-hardened AA 5xxx aluminium alloy. Transactions of Nonferrous Metals Society of China (English Edition) 35 (1), S. 30 - 44 (2025)

Hachet, G.; Tehranchi, A.; Shi, H.; Prabhakar, J. M.; Wei, S.; Angenendt, K.; Zaefferer, S.; Gault, B.; Sun, B.; Ponge, D. et al.; Raabe, D.: Segregation at prior austenite grain boundaries: The competition between boron and hydrogen. International Journal of Hydrogen Energy 95, S. 734 - 746 (2024)

Bonnekoh, C.; Lied, P.; Zaefferer, S.; Jäntsch, U.; Hoffmann, A.; Reiser, J.; Rieth, M.: Corrigendum to "The brittle-to-ductile transition in cold-rolled tungsten sheets: Contributions of grain and subgrain boundaries to the enhanced ductility after pre-deformation" [Nucl. Mater. Energy 25 (2020) 100769]. Nuclear Materials and Energy 41, 101833 (2024)

An, D.; Xiao, Y.; Yu, J.; Zhang, X.; Li, Z.; Ma, Y.; Li, R.; Han, X.; Li, X.; Chen, J. et al.; Zaefferer, S.: The Role of Dislocation Type in the Thermal Stability of Cellular Structures in Additively Manufactured Austenitic Stainless Steel. Advanced Science 11 (33), 2402962 (2024)

Sun, Z.; Tsai, S.-P.; Joachim Konijnenberg, P.; Wang, J.-Y.; Zaefferer, S.: A large-volume 3D EBSD study on additively manufactured 316L stainless steel. Scripta Materialia 238, 115723 (2024)

Tekumalla, S.; Seita, M.; Zaefferer, S.: Delineating dislocation structures and residual stresses in additively manufactured alloys. Acta Materialia 262, 119413 (2024)

Yilmaz, C.; Poul, M.; Lahn, L.; Raabe, D.; Zaefferer, S.: Dislocation-assisted particle dissolution: A new hypothesis for abnormal growth of Goss grains in grain-oriented electrical steels. Acta Materialia 258, 119170 (2023)

Herbst, S.; Karsten, E.; Gerstein, G.; Reschka, S.; Nürnberger, F.; Zaefferer, S.; Maier, H. J.: Electroplasticity Mechanisms in hcp Materials. Advanced Engineering Materials 25 (18), 2201912 (2023)

Khanchandani, H.; Ponge, D.; Zaefferer, S.; Gault, B.: Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel. Materialia 28, 101776 (2023)

Changizi, R.; Zaefferer, S.; Ziegler, C.; Romaka, V.; Lotsch, B. V.; Scheu, C.: Combined structural analysis and cathodoluminescence investigations of single Pr³⁺-doped Ca₂Nb₃O₁₀ nanosheets. Scientific Reports 13, 8055 (2023)

Khanchandani, H.; Stephenson, L.; Raabe, D.; Zaefferer, S.; Gault, B.: Hydrogen/Deuterium Charging Methods for the Investigation of Site-Specific Microstructural Features by Atom Probe Tomography. Microscopy and Microanalysis 28 (S1), S. 1664 (2022)

Sun, Z.; Ma, Y.; Ponge, D.; Zaefferer, S.; Jägle, E. A.; Gault, B.; Rollett, A. D.; Raabe, D.: Thermodynamics-guided alloy and process design for additive manufacturing. Nature Communications 13, 4361 (2022)

Ma, Y.; Souza Filho, I. R.; Bai, Y.; Schenk, J.; Patisson, F.; Beck, A.; van Bokhoven, J. A.; Willinger, M. G.; Li, K.; Xie, D. et al.; Ponge, D.; Zaefferer, S.; Gault, B.; Mianroodi, J. R.; Raabe, D.: Hierarchical nature of hydrogen-based direct reduction of iron oxides. Scripta Materialia 213, 114571 (2022)

Changizi, R.; Zaefferer, S.; Abdellaoui, L.; Scheu, C.: Effects of Defect Density on Optical Properties Using Correlative Cathodoluminescence and Transmission Electron Microscopy Measurements on Identical PrNbO₄ Particles. ACS Applied Electronic Materials 4 (4), S. 2095 - 2100 (2022)

Zhu, C.; Kurniawan, C.; Ochsendorf, M.; An, D.; Zaefferer, S.; De Graef, M.: Orientation, pattern center refinement and deformation state extraction through global optimization algorithms. Ultramicroscopy 233, 113407 (2022)

Gomell, L.; Tsai, S.-P.; Roscher, M.; Bueno Villoro, R.; Konijnenberg, P. J.; Zaefferer, S.; Scheu, C.; Gault, B.: In-situ nitriding of Fe₂VAl during laser surface remelting to manipulate microstructure and crystalline defects. Physical Review Materials 6 (8), 085405 (2022)

Tsai, S.-P.; Konijnenberg, P. J.; Gonzalez, I.; Hartke, S.; Griffiths, T. A.; Herbig, M.; Kawano-Miyata, K.; Taniyama, A.; Sano, N.; Zaefferer, S.: Development of a new, fully automated system for electron backscatter diffraction (EBSD)-based large volume three-dimensional microstructure mapping using serial sectioning by mechanical polishing, and its application to the analysis of special boundaries in 316L stainless steel. Review of Scientific Instruments 93, 093707 (2022)

Nandy, S.; Tsai, S.-P.; Stephenson, L.; Raabe, D.; Zaefferer, S.: The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium. Journal of Magnesium and Alloys 9 (5), S. 1521 - 1536 (2021)

Varanasi, R. S.; Zaefferer, S.; Sun, B.; Ponge, D.: Localized deformation inside the Lüders front of a medium manganese steel. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 824, 141816 (2021)

Tsai, S.-P.; Makineni, S. K.; Gault, B.; Kawano-Miyata, K.; Taniyama, A.; Zaefferer, S.: Precipitation formation on ∑5 and ∑7 grain boundaries in 316L stainless steel and their roles on intergranular corrosion. Acta Materialia 210, 116822 (2021)