Bengtsson Blücher, D.; Svensson, J.-E.; Johansson, L.-G.; Rohwerder, M.; Stratmann, M.: Scaning Kelvin Probe Force Microscopy: A Useful Tool for Studying Atmospheric Corrosion of MgAl Alloys In Situ. Journal of the Electrochemical Society 151, 12, pp. B621 - B626 (2004)

Blücher, D. B.; Svensson, J. E.; Johansson, L. G.; Rohwerder, M.; Stratmann, M.: Scanning Kelvin probe force microscopy - A useful tool for studying atmospheric corrosion of MgAl alloys in situ. Journal of the Electrochemical Society 151 (12), pp. B621 - B626 (2004)

Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Electrochemical characterizations of precipitates formed on zinc in alkaline sulphate solution with increasing pH values. Electrochemistry Communicatios 6, 8, pp. 800 - 804 (2004)

Cha, S. C.; Spiegel, M.: Fundamental studies on alkali chloride induced corrosion during combustion of biomass. Materials Science Forum 461–464, p. 1055 - 1055 (2004)

Grabke, H. J.; Spiegel, M.; Zahs, A.: Role of Alloying Elements and Carbides in the Chlorine-induced Corrosion of Steels and Alloys. Materials Research 7 (1), pp. 89 - 95 (2004)

Grundmeier, G.; Thiemann, P.; Carpentier, J.; Shirtcliffe, N.; Stratmann, M.: Tailoring of the morphology and chemical composition of thin organosilane microwave plasma polymer layers on metal substrates. Thin Solid Films 446 (1), pp. 61 - 71 (2004)

Hassel, A. W.: Surface treatment of NiTi for medical applications. Minimally Invasive Therapy & Allied Technologies 13, 4, pp. 240 - 247 (2004)

Li, Y. S.; Spiegel, M.: Models describing the degradation of FeAl and NiAl alloys induced by ZnCl₂/KCl melt at 400-450 °C. Corrosion Science 46, 8 (2004)

Li, Y. S.; Spiegel, M.: High temperature interactions of pure Cr with KCl. Materials Science Forum 461-464, pp. 1047 - 1054 (2004)

Parezanovic, I.; Spiegel, M.: Surface modification of various Fe-Si and Fe-Mn alloys by oxidation/reduction treatments. Surface Engineering 20, 2 (2004)

Parezanovic, I.; Strauch, E.; Spiegel, M.: Development of spinel forming alloys with improved electronic conductivity for MCFC application. Journal of Power Sources 135, pp. 52 - 61 (2004)

Pöter, B.; Stein, F.; Spiegel, M.: Initial stages of Al₂0₃ growth on Fe–Al intermetallic phases. Lithos 73, 1-2, p. S89 - S89 (2004)

Ruh, A.; Spiegel, M.: Kinetic investigations on salt melt induced high temperature corrosion of pure metals. Materials Science Forum 461-464, pp. 61 - 68 (2004)

van der Kloet, J.; Schmidt, W.; Hassel, A. W.; Stratmann, M.: The Role of Chromate in Filiform Corrosion Inhibition. Electrochimica Acta 49 (10), pp. 1675 - 1685 (2004)

Wapner, K.; Grundmeier, G.: Scanning Kelvin Probe measurements of the stability of adhesive/metal interfaces in corrosive environments. Advanced Engineering Materials 6, 3, pp. 163 - 167 (2004)

Zhong, Q. D.; Rohwerder, M.; Zhao, Z.; Jin, Z.: Semiconsucting behavior of temporarily protective oil coating on the surface of AISI 304 satinles steel in 5% Na2SO4 soultion during its degradation. Journal of the Electrochemical Society 151, 7, pp. B446 - B452 (2004)

Zhong, Q.; Rohwerder, M.; Zhao, Z.; Jin, Z.: Semiconducting behavior of temporarily protective oil coating on the surface of AISI 304 stainless steel in 5% Na₂SO₄ solution during its degradation. Journal of the Electrochemical Society 151 (7), pp. B446 - B452 (2004)

Grabke, H. J.; Martinz, H. P.; Müller-Lorenz, E. M.: Metal Dusting Resistance of High Chromium-Alloys. Material and Corrosion 54, pp. 860 - 893 (2003)

Grabke, H. J.; Spiegel, M.: Occurrence of Metal Dusting - Referring to Failure Cases. Material and Corrosion 54 (10), pp. 799 - 804 (2003)

Grabke, H. J.; Müller-Lorenz, E. M.; Zinke, M.: Metal Dusting Behaviour of Welded Ni-Base Alloys with Different Surface Finish. Material and Corrosion 54, pp. 785 - 792 (2003)